8.0

Setting Up Your System
Setting Up Audio
11
Audio Channels
Lists the available audio channels.
Bits Per Sample
Shows the number of bits per sample.
Sync Reference
Shows if the driver is used as sync reference.
NOTE
To take advantage of DirectX Full Duplex driver, the audio hardware must support
Windows Driver Model (WDM).
Using Hardware that is Based on an External Clock Source
For proper audio playback and recording, you must set the sample rate of the
project to the sample rate of the incoming clock signals. If you are using an external
clock source, Cubase must be notified that it receives external clock signals and
derives its speed from that source.
PROCEDURE
1. Select Devices > Devices Setup.
2. In the devices list, select the page of your audio hardware driver.
3. Activate Externally clocked.
RESULT
Cubase accepts the sample rate mismatch, and playback is therefore faster or
slower.
When a sample rate mismatch occurs, the Record Format field on the status line
is highlighted in a different color.
Using Several Audio Applications Simultaneously
If you want to use several audio applications simultaneously, you must allow other
applications to play back via your audio hardware even though Cubase is running.
PROCEDURE
1. Select Devices > Devices Setup.
2. In the devices list, select the VST Audio System page.
3. Activate Release Driver when Application is in Background.
RESULT
The application that is currently active gets access to the audio hardware.