6.0

28
The included VST instruments
pads used by this instance of Groove Agent ONE. The
Size parameter indicates the amount of RAM occupied by
the currently loaded samples. The Polyphony counter
shows the number of pads currently playing.
• Click on a pad for sound editing.
It turns light green and the display shows its sample parameters.
• To adjust a parameter, either use one of the quick con-
trols below the display, or click on the parameter in the
display and adjust it by dragging your mouse.
• You can select multiple pads for sound editing by [Ctrl]/
[Command]-clicking on them, and adjust their parameters
in one go with the quick controls below the display.
The first selected pad lights up light green, all other selected pads turn
dark green. The display shows the parameters of the first selected pad.
• By default, the parameters of the selected samples are
adjusted in relation to their previous settings. If you want
to set a specific value for all selected samples, [Ctrl]/
[Command]-click the quick control to set an initial value,
release [Ctrl]/[Command] and adjust the value.
The parameter will be set to the same value for all selected sample pads.
On the Voice, Filter, and Amplifier pages, sample-specific
data is displayed:
Depending on the selected page (Play, Voice, Filter, Am-
plifier), up to six quick controls with different pad-specific
parameter assignments are displayed.
Play parameters
The parameter controls on the Play page are copies of the
parameters on the Voice, Filter, and Amplifier pages.
The row of parameter controls below the LCD display
shows six parameters:
Voice parameters
The row of parameter controls below the LCD display
shows six parameters:
Parameter Description
Brightness
slider
Use the little slider at the very top of the LCD display to
set the display brightness.
VST Preset The name of a loaded VST Preset is displayed in the top
left of the LCD display.
Sample/Pad The name of the sample (and the pad to which it is as-
signed).
Trash icon You can remove the current sample assignment by click-
ing on a pad or on the Layer indicator (see below) and
dragging it onto the trash icon.
MIDI input off When the MIDI symbol button in the top right corner of the
LCD display is activated, the LCD display shows the
waveform and parameter values of the currently playing
sample. When this button is deactivated, the display
shows only the data for the currently edit selected sample.
Layer indicator The long bar near the top of the LCD display shows the
active layer for the current pad. If more than one layer ex
-
ist for the selected pad, the bar is divided accordingly.
You can drag the dividing line between layers to change
the velocity ranges of the layers. You can drag a new
sample from the MediaBay and drop it directly onto the
Layer indicator bar (this is the same as dropping a sample
on a pad). You can drag layers to a different position on
the bar.
Layer number The layer number indicates which is the active layer of the
current pad.
Sample This is the name of the sample file.
Velocity Here you can specify a velocity range for the current
layer.
Coarse Here you can tune the sample by up to ±12 semitones.
Fine This parameter lets you fine-tune the sample by up to
±100 cents.
Volume Sets the sample volume.
Waveform
display
The waveform of the current sample.
s/e locators in
waveform
display
You can define the sample start and end points by drag-
ging the s and e locators in the waveform display. When
you click on a locator and press [Ctrl], this will zoom in on
the waveform and center the display around the locator.
Note that the locators automatically snap to zero cross
-
ings.
Parameter Description
Volume The volume of the pad currently selected for editing.
Pan The panorama setting of the pad currently selected for
editing.
Coarse Use this control to tune the pad by up to ±12 semitones.
Cutoff Sets the filter cutoff frequency.
Q Sets the filter resonance.
Output Groove Agent ONE provides up to 16 stereo outputs. You
can route pads to individual outputs using this control.
Parameter Description
Mode Here you can reverse the currently selected sample so
that you hear it backwards.
Coarse Use this control to tune the pad by up to ±12 semitones.
Fine Use this control to fine-tune the pad by up to ±100
cents.
Parameter Description