6.0

23
The included effect plug-ins
Tools plug-ins
This section describes the plug-ins in the “Tools” category.
Tuner (not in Cubase LE)
This is a guitar tuner. Simply connect a guitar or other in-
strument to an audio input and select the Tuner as an in-
sert effect (make sure you deactivate any other effect that
alters pitch, like chorus or vibrato).
When you play a note, the pitch is shown in the middle of
the display. In addition, the frequency in Hz is shown in the
bottom left corner and the octave range in the bottom right
corner.
The two arrows indicate any deviation in pitch. If the pitch
is flat, they are positioned in the left half of the display, if
the pitch is sharp they are in the right half. The deviation is
also shown (in Cent) in the upper area of the display.
• If a string is out of tune (e. g. if the pitch for the E string
is shown as Eb), tune the string so that the correct pitch is
shown and the two arrows are in the middle.
Repeat this procedure for each string.
• To mute the output signal so that you can tune the
strings in silence, activate the Mute button at the bottom
middle of the plug-in panel.