4.0

31
The included effect plug-ins
Tranceformer
Tranceformer is a ring modulator effect, in which the in-
coming audio is ring modulated by an internal, variable fre-
quency oscillator, producing new harmonics. A second
oscillator can be used to modulate the frequency of the
first oscillator, in sync with the Song tempo if needed.
Ö Note that clicking and dragging in the display allows
you to adjust the Tone and Depth parameters at the same
time!
Invert Stereo This inverts the LFO waveform for the right channel of the
oscillator, which produces a wider stereo perspective for
the modulation.
Envelope Gener-
ator (Attack and
Decay dials)
The Envelope Generator section controls how the input
signal is converted to envelope data, which can then be
used to control oscillator pitch and LFO speed. It has two
main controls:
Attack sets how fast the envelope output level rises in re-
sponse to a rising input signal.
Decay controls how fast the envelope output level falls in
response to a falling input signal.
Lock L<R When this button is enabled, the L and R input signals
are merged, and produce the same envelope output level
for both oscillator channels. When disabled, each chan-
nel has its own envelope, which affects the two channels
of the oscillator independently.
Output Sets the overall volume.
Mix Adjusts the mix between dry and processed signal.
Parameter Description
Parameter Description
Waveform
buttons
Sets the pitch modulation waveform.
Tone Sets the frequency (pitch) of the modulating oscillator (1
to 5000 Hz).
Depth Governs the depth of the pitch modulation.
Speed If tempo sync is on, this is where you specify the base
note value for tempo-syncing the effect (1/1 to 1/32,
straight, triplet or dotted). Note that there is no note value
modifier for this effect. If tempo sync is off, the modula-
tion speed can be set freely with the Speed knob, without
sync to tempo.
Tempo sync
on/off
The button above the Speed knob is used to switch
tempo sync on or off. The button is lit when tempo sync is
on.
On button Turns modulation of the pitch parameter on or off.
Mono button Governs whether the output will be stereo or mono.
Output Adjusts the output level of the effect.
Mix Sets the level balance between the dry signal and the ef-
fect.