4.0

26
The included effect plug-ins
Spatial plug-ins
This section contains descriptions of the plug-ins in the
“Spatial” category.
MonoToStereo
This effect will turn a mono signal into a “pseudo-stereo”
signal. The plug-in must be inserted on a stereo track
playing a mono file to work.
The parameters are as follows:
StereoEnhancer
This plug-in will expand the stereo width of (stereo) audio
material. It can not be used with mono files.
The parameters are as follows:
Parameter Description
Width This controls the width or depth of the stereo enhance-
ment. Turn clockwise to increase the enhancement.
Delay This parameter increases the amount of differences be-
tween the left and right channels to further increase the
stereo effect.
Color This parameter also generates differences between the
channels to increase the stereo effect.
Mono This switches the output to mono, to check for possible
unwanted coloring of the sound which sometimes can
occur when creating an artificial stereo image.
Parameter Description
Width This controls the width or depth of the stereo enhance-
ment. Turn clockwise to increase the enhancement.
Delay This parameter increases the amount of differences be-
tween the left and right channels to further increase the
stereo effect.
Color This parameter also generates differences between the
channels to increase the stereo enhancement.
Mono This switches the output to mono, to check for possible
unwanted coloring of the sound which sometimes can
occur when enhancing the stereo image.