12.0

● Digital signal processing, such as pan or effects, must be turned off for the VST System Link
signal.
● For RME Audio Hammerfall DSP audio hardware, select the default or plain preset for the
Totalmix function.
Otherwise signal loops might occur and VST System Link cannot work.
Setting up Sample Rates
All projects on all computer must be set up to the same sample rate.
PROCEDURE
1.
Select Project> Project Setup.
2.
In the Project Time Displays section, open the Sample Rate pop-up menu and select a
sample rate.
Setting up Digital Audio Connections
PROCEDURE
1. Select Studio> Audio Connections.
2. Click the Inputs tab, and click Add Bus.
3. In the Add Input Bus dialog, congure the bus.
4. Click Add Bus.
5. Click the Outputs tab, and click Add Bus.
6. In the Add Output Bus dialog, congure the bus.
7. Click Add Bus.
8. Repeat these steps for all applications.
Set up the same conguration in all applications. If you have 4 stereo output busses on
computer 1, you want 4 stereo input busses on computer 2, etc.
9. Route the applications to the digital inputs and outputs.
RELATED LINKS
Audio Bus Setup on page 22
Audio Connections Window on page 28
Verifying the Digital Connection
PROCEDURE
1.
Connect an audio source to your audio interface.
2.
Start recording, playing back, and mixing.
3.
On computer 1, play back some audio.
4.
Select Studio> MixConsole, and route the channel that contains the audio material to one
of the digital output busses.
5.
On computer 2, select Studio> MixConsole, and locate the corresponding digital input bus.
VST System Link
Setting up VST System Link
701
Cubase AI 12.0.20