12.0

Displays the pitchbend value at the project cursor position. What exactly is shown depends
on the Show Semitones Grid setting in the Grid Settings pane:
● If Show Semitones Grid is activated, this value shows the semitones value at the project
cursor position. The range goes from +96 semitones to -96 semitones. The value is
shown in semitones and cents.
● If Show Semitones Grid is deactivated, this value shows the pitchbend MIDI value at the
project cursor position. The range goes from +8191 steps to -8192 steps.
3 Set up Grid
Opens the Grid Settings pane that allows you to set up the semitones grid for the pitchbend
controller lane.
4
Snap Pitchbend Events
Restricts vertical movement and positioning of controller events to the semitones grid. By
default, activating
Snap Pitchbend Events also activates Show Semitones Grid to show the
grid that the events are snapping to.
NOTE
Snap Pitchbend Events is not effective in the controller event editor.
5
Controller value from MIDI device
This value shows up if you input MIDI data for this controller lane from your MIDI device.
6 Semitones grid
The semitones grid shows the semitone values. The amount of grid lines and their width
depends on the settings for
Pitchbend Range: Down and Pitchbend Range: Up. By default,
the range is set to +/- 2 semitones, that is, a major second.
NOTE
You can show the grid even if Snap Pitchbend Events is deactivated.
7 Controller curve
The pitchbend controller curve.
RELATED LINKS
Controller Event Editor on page 575
Grid Settings on page 567
Grid Settings
The Grid Settings pane allows you to set up a semitones grid for the pitchbend controller lane.
As grid settings only affect the corresponding track, you can set up different grid settings for
different MIDI or instrument tracks. All grid settings are saved with the project.
●
To show the Grid Settings for pitchbend controller lanes, add a pitchbend controller lane,
and click Set up Grid.
MIDI Editors
Controller Display
567
Cubase AI 12.0.20