12.0

The following settings are available:
Separate Channels
Separates MIDI events according to their channel. This is useful for MIDI parts on MIDI
channel
Any that contain events on different MIDI channels.
Separate Pitches
Separates MIDI events according to their pitch. This is useful for drum and percussion
tracks, where different pitches usually correspond to separate drum sounds.
Dissolve to Lanes
Dissolves the part to lanes.
Optimized Display
Automatically removes silent areas of the resulting parts.
NOTE
This option is not available when Dissolve to Lanes is activated.
Dissolving Parts into Separate Channels
You can dissolve MIDI parts that contain events on different MIDI channels, and distribute the
events into new parts on new tracks, one for each MIDI channel found.
PROCEDURE
1. Select the parts that contain MIDI events on different channels.
2. Select MIDI> Dissolve Part.
3. Activate Separate Channels.
4. Click Process.
RESULT
For each MIDI channel used in the selected parts, a new MIDI track is created and set to
the corresponding MIDI channel. Each event is copied into the part on the track with the
corresponding MIDI channel, and the original parts are muted.
MIDI Channel Setting
Setting a track to MIDI channel Any causes each MIDI event to play back on its original MIDI
channel, rather than a channel set for the whole track.
There are two main situations when Any channel tracks are useful:
●
When you record several MIDI channels at the same time.
MIDI Functions
Dissolve Part Dialog
538
Cubase AI 12.0.20