12.0

RESULT
The preset is deleted.
Monitoring Bus
The default output bus (Main Mix) is used for monitoring. You can adjust the monitoring level in
the MixConsole.
RELATED LINKS
Setting the Default Output Bus (Main Mix) on page 30
MixConsole on page 263
Bus Congurations
After you have set up all the required busses for a project, you can edit the names and change
port assignments. The bus conguration is saved with the project.
Removing Busses
You can remove busses that you no longer need.
PROCEDURE
● In the Audio Connections window, do one of the following:
● To remove a single bus, right-click the bus in the list and select Remove Bus.
Alternatively, you can select the bus and press Backspace .
● To remove multiple input or output busses at the same time, use Shift or Ctrl/Cmd to
select them in the list, right-click them, and select Remove Selected Busses.
Changing Port Assignments
You can change the port assignment of busses.
PROCEDURE
1. Select Studio> Audio Connections.
2. Do one of the following:
● To change the assignment of a single bus, open the Device Port pop-up menu, and
select a new port.
● To assign subsequent busses to several selected busses, open the Device Port pop-up
menu for the
rst selected entry, press Shift , and select a device port.
● To assign the same port to several selected busses, open the Device Port pop-up menu
for the
rst selected entry, press Shift - Alt/Opt , and select a device port.
Audio Connections
Monitoring Bus
32
Cubase AI 12.0.20