12.0

Adding Insert Effects
If you add insert effects to audio channels, the audio is routed through the insert effects.
PROCEDURE
1. Select the audio track.
2. In the track list, click Edit Channel Settings.
The Channel Settings window for the audio channel opens.
3. In the Inserts section, click the rst insert slot on the Inserts tab, and select an effect from
the selector.
RESULT
The selected insert effect is loaded and activated, and the audio is routed through it. The effect
control panel is opened.
RELATED LINKS
Effect Control Panel on page 315
Adding Insert Effects to Busses
If you add insert effects to input busses, the effects become a permanent part of the recorded
audio le. If you add insert effects to output busses, all audio routed to that bus is affected.
Insert effects that are added to output busses are sometimes referred to as master effects.
PROCEDURE
1. Select Studio> MixConsole to open the MixConsole.
2. In the fader section, perform one of the following actions:
● Locate the input channel, and click Edit Channel Settings to edit the input bus.
● Locate the output channel, and click Edit Channel Settings to edit the output bus.
The Channel Settings window for the selected channel opens.
3. In the Inserts section, click the rst insert slot on the Inserts tab, and select an effect from
the selector.
RESULT
The selected insert effect is added to the bus and activated. The effect control panel is opened.
Adding Insert Effects to Group Channels
If you add insert effects to group channels, you can process several audio tracks through the
same effect.
PROCEDURE
1.
In the global track controls area of the track list, click Add Track .
Audio Effects
Insert Effects
306
Cubase AI 12.0.20