12.0

Table Of Contents
Attack
Determines how fast the compressor responds to signals above the set threshold.
The longer the attack time, the more of the early part of the signal passes through
unprocessed.
Release
Sets the time it takes for the gain to return to its original level when the signal drops
below the threshold.
Auto Make-Up
Automatically adjusts the output for gain loss.
Auto Release
Automatically nds the best Release setting for the audio material.
Make-Up Gain
Compensates for output gain loss caused by compression.
Gain Reduction LED
Indicates the level of compression of the signal.
RELATED LINKS
Standard Compressor – Details View on page 298
EQ
You can make equalizer settings for the 4 bands. They have different default frequency values
and different Q names. However, they all have the same frequency range (20 Hz to 20 kHz). You
can specify different
lter types for each individual module.
1 Activate/Deactivate Band
Activates/Deactivates the equalizer band.
2 Select EQ Band Type
Opens a pop-up menu where you can select an EQ type for the band. Bands 1 and 4 can act
as parametric, shelf, or high/low-cut lters. EQ bands 2 and 3 are always parametric lters.
3
Gain
Sets the amount of cut or boost. The range is ±24 dB.
4
Q-Factor
Determines the width of the affected frequency range. Higher values result in narrower
frequency ranges.
5
Frequency
Sets the center frequency of the frequency range to be cut or boosted.
MixConsole
MixConsole Window
289
Cubase AI 12.0.20