12.0

● Mono output busses, or mono group output busses.
These should not lead to feedback.
RELATED LINKS
Routing on page 283
Input Routing Congurations for Stereo Channels
For stereo channels, the following input routing congurations are available:
● Mono or stereo input busses.
●
Mono or stereo output busses, and mono or stereo group output busses.
These should not lead to feedback.
RELATED LINKS
Routing on page 283
Output Busses
For output busses, any assignment is possible.
You can route the output of audio, instrument, group, and FX channels to output, group, and FX
channels.
Routing the outputs from multiple audio channels to a group allows you to control the channel
levels using one fader, and to apply the same effects and equalization to all the channels.
Inserts
The Inserts rack for audio-related channels features insert effect slots that allow you to load
insert effects for a channel. For MIDI channels, you can load MIDI inserts.
For further information, see the separate document Plug-in Reference.
RELATED LINKS
Audio Effects on page 303
Adding Insert Effects
You can add insert effects into MixConsole channels.
PROCEDURE
1. On the MixConsole toolbar, click Racks, and activate Inserts to show the Inserts rack above
the fader section.
2.
Click one of the insert slots to open the insert selector.
3.
Click an insert effect to select it.
RESULT
The selected insert effect is loaded and automatically activated. Its plug-in panel opens.
Bypassing Insert Effects
You can bypass all insert effects.
●
To bypass all inserts, click Bypass at the top of the Inserts rack.
MixConsole
MixConsole Window
284
Cubase AI 12.0.20