11.0

Table Of Contents
When the Sample Editor is not open or when there is no audio le selected in the Pool,
Space still toggles the global project playback.
Show Timecode Subframes
Shows subframes for all frame-based display formats.
Return to Start Position on Stop
Automatically sets the project cursor to the position where recording or playback last
started when you stop playback.
Stop Playback while Winding
Stops playback when you click Rewind or Fast Forward on the Transport panel.
Wind Speed Options
These options affect the fast forward/rewind speed.
Adjust to Zoom adapts the wind speed to the horizontal zoom factor.
If you zoom in very close for detailed editing, you probably do not want to have a
high fast forward/rewind speed. Because of this, the Speed Factor does not have
any effect in this mode. The
Fast Wind Factor still applies.
Fixed keeps a xed wind speed regardless of the horizontal zoom factor.
Speed Factor allows you to set the wind speed. You can set a value between 2 and
50. The higher the value, the faster the wind speed will be.
If Adjust to Zoom is activated, this has no effect.
Fast Wind Factor allows you to set the winding speed to a multiple for fast
winding.
If you press Shift while fast forwarding or rewinding, the wind speed will increase.
The increase in speed is a multiple of the Speed Factor. Meaning that if you set the
Fast Wind Factor to 2, the wind speed will be twice as fast. If you set it to 4, the
wind speed will be 4 times as fast, etc. You can set a value between 2 and 50.
Cursor Width
Adjusts the width of the project cursor line.
Zoom while Locating in Time Scale
Allows you to zoom in or out by clicking in the ruler and dragging down or up.
Clicking Locator Range in Upper Part of the Ruler Activates Cycle
Allows you to activate/deactivate cycle mode when you click the locator range in the
upper part of the ruler.
Locate when Clicked in Empty Space
Allows you to move the project cursor by clicking in an empty area of the Project
window.
Transport - Scrub
Scrub Volume
Sets the playback volume for the Scrub tool in the Project window and audio editors.
NOTE
This does not affect the scrub volume controlled by any connected hardware.
Use High Quality Scrub Mode
Enables effects for scrubbing and uses a higher resampling quality. However,
scrubbing will be more demanding on the processor.
Preferences
Transport
692
Cubase AI 11.0.0