11.0

Adding Continuous Controllers
You can add continuous controllers to your note events.
PREREQUISITE
You have added a controller lane.
PROCEDURE
1. Open the Controller Selection and Functions pop-up menu and select a continuous
controller.
2. Select the Draw tool or the Line tool.
3. Do one of the following:
●
To add a single event, click in the controller display.
●
To add a multiple events, click and drag in the controller display.
●
To add a Modulation (CC1) event, copy note events from the Key Editor note display
and paste them on a controller lane in the controller display.
When you move the Draw tool on the controller lane, a tooltip shows the position and the
controller value at the mouse position.
RESULT
The added events are added as steps that correspond to the event values. The beginning of an
event is marked by a curve point. Controller events have no length. The value of a controller
event in the display is valid until the beginning of the next controller event.
RELATED LINKS
Adding Controller Lanes on page 493
Line Tool Modes on page 504
Controller Selection and Functions Menu on page 491
Editing Continuous Controllers
You can edit the values of the continuous controller events that you added or recorded.
PREREQUISITE
You have added a controller lane and set it up to display controller events. You have added
controller events for several notes.
PROCEDURE
1. On the toolbar, select the Object Selection, the Draw, or the Line tool.
2. Do one of the following:
●
If you selected the Draw, or the Line tool, drag in the controller display.
●
If you selected the Object Selection tool, press Alt and drag in the controller display.
RESULT
The controller event is edited.
RELATED LINKS
Line Tool Modes on page 504
MIDI Editors
Controller Display
502
Cubase AI 11.0.0