11.0

PROCEDURE
● In the effect plug-in panel, right-click the parameter.
●
Select Add “x” to Quick Controls (where x is the name of the parameter) to assign the
parameter to the next empty slot.
● Select Add “x” to Quick Controls Slot (where x is the name of the parameter), and
select the slot from the submenu to assign the parameter to a
specic slot.
RESULT
You can now control the effect parameters via the Quick Controls section in the Inspector.
Using QC Learn Mode
The QC Learn Mode allows you to assign a parameter by moving controls. This applies to all
automatable controls.
PROCEDURE
1. In the Inspector for your track, open the Quick Controls section.
2. Activate QC Learn Mode.
3. Select the slot to which you want to assign a parameter.
4. Move the control.
RESULT
The track parameter is assigned to the corresponding control.
RELATED LINKS
Controlling Automatable Parameters on page 446
Setting Instrument Parameter Assignments to Default
If you have changed the parameter assignment or if you manually routed a MIDI track to a VST
instrument, you can retrieve the default assignments.
PROCEDURE
1. In the Inspector for the instrument or MIDI track, open the Quick Controls section.
2. Click Get Default QCs from Plug-in.
RESULT
The instrument parameter assignments are set to default.
Removing Parameter Assignments
You can remove parameter assignments for individual Quick Controls or for all Quick Controls
at once.
PROCEDURE
● Do one of the following:
●
To remove a parameter from a slot, click in the corresponding slot and select No
parameter from the pop-up menu.
Track Quick Controls
Parameter Assignment
444
Cubase AI 11.0.0