11.0

Table Of Contents

Fine-Tuning Effect Settings

You can take your effect parameter settings as a starting point for further ne-tuning and then

compare the new settings with the original settings.

PREREQUISITE

You have adjusted the parameters for an effect.

PROCEDURE

1. On the control panel for the effect, click Switch between A/B Settings.

This copies the initial parameter setting A to setting B.

2. Fine-tune the effect parameters.

These parameter settings are now saved as setting B.

RESULT

You can now switch between both settings by clicking Switch between A/B Settings. You can

compare them, make further adjustments or just go back to setting A. Settings A and B are saved

with the project.

AFTER COMPLETING THIS TASK

You can copy the settings between A and B by clicking Copy A to B. You can take these settings

as a starting point for further

ne-tuning.

Hiding/Showing Effect Control Panels

When you add an audio effect, the respective plug-in control panel opens automatically. You can

hide the control panels from view. This is useful to get a better overview if you added a number

of plug-ins to your project whose control panels clutter up the screen.

PROCEDURE

● Select Window > Hide Plug-in Windows.

NOTE

This also hides VST instrument control panels.

RESULT

The control panels are hidden and sent to the back of the application. To show them again, select

Show Plug-in Windows.