11.0

4. Click Add Track.
The group track is added to the track list.
5. In the Inspector for the group track, open the Inserts section.
6. Click the rst effect slot and select an effect from the selector.
7. In the Inspector for the audio tracks, open the Output Routing pop-up menus and select
the group.
RESULT
The signal from the audio track is routed through the group channel and passes through the
insert effect.
RELATED LINKS
Add Track Dialog – Group Channel on page 104
Adding Group Channels to Selected Channels
You can add a group channel to several selected channels.
PREREQUISITE
Your project contains some tracks that you want to route to a group channel.
PROCEDURE
1. In the track list, right-click the tracks that you want to route to a group channel, and select
Add Track > Group Channel to Selected Channels.
2. In the Add Track dialog, open the Conguration pop-up menu, and select a channel
conguration for the group channel track.
3. Open the Folder Setup pop-up menu, and select if you want to create group channel tracks
inside or outside a dedicated folder.
4. Click OK.
RESULT
The group channel track is added to the track list. In the Output Routing pop-up menu of the
selected tracks, the group is selected. The tracks are routed to the group channel.
RELATED LINKS
Add Track Dialog – Group Channel on page 104
Copying Insert Effects
You can add insert effects to audio channels by copying them from other audio channels or from
other slots of the same audio channel.
PREREQUISITE
You have added at least one insert effect to an audio channel.
PROCEDURE
1. Select Studio > MixConsole.
2. In the Inserts rack, locate the insert effect that you want to copy.
3. Hold down Alt/Opt , and drag the insert effect on an insert slot.
Audio Effects
Insert Effects
285
Cubase AI 11.0.0