11.0

Table Of Contents

Max. Move

Allows you to select a note value to specify a maximum distance that the audio or MIDI

can be moved.

Orig. Position

Sets the original starting position of the quantized material as starting point of the

quantizing. This allows you to synchronize material that does not start from bar 1 of

the project.

Rough Quantize

Allows you to set a distance in ticks so that your audio or MIDI is quantized to random

positions within the specied distance from the quantize grid. This allows for slight

variations and, at the same time, prevents your audio or MIDI from ending up too far

away from the grid.

Soft Quantize Mode

Applies a loose quantization so that your audio or MIDI moves only part of the way to

the closest quantize grid position. The Quantize Strength value to the right

determines how close your audio or MIDI moves towards the grid.

NOTE

Soft quantizing is based on the current, quantized positions and not on the original

event positions. You can repeatedly use the soft quantize mode to gradually move your

audio or MIDI closer to the quantize grid until you have found the right timing.

MIDI CC

Moves controllers related to MIDI notes (pitchbend, etc.) automatically with the notes

when these are quantized.

Reset Quantize

Resets your audio or MIDI to its original, unquantized state.

IMPORTANT

This function has no effect on an event that was moved manually.

Auto

Applies any changes immediately to the selected parts or events. A way of using this

feature is to set up a playback loop and adjust the settings until you are satised with

the result.

Quantize

Applies your settings.