11.0

Setting up Audio
You must set up your audio equipment before you can use it in Cubase.
IMPORTANT
Make sure that all equipment is turned off before making any connections.
Simple Stereo Input and Output Setup
If you only use a stereo input and output from Cubase, you can connect your audio hardware, for
example, the inputs of your audio card or your audio interface, directly to the input source and
the outputs to a power
amplier and speaker.
Audio Connections
Your system setup depends on many different factors, for example, on the kind of project that
you want to create, on the external equipment that you want to use, or on the computer
hardware that is available to you. Therefore, the following sections can only serve as examples.
How to connect your equipment, that is, whether to use digital or analog connections also
depends on your setup.
Recording Levels and Inputs
When you connect your equipment, make sure that the impedance and levels of the audio
sources and inputs are matched. Using the correct type of input is important to avoid distortion
or noisy recordings. For example, different inputs can be used, such as consumer line level (-10
dBV) or professional line level (+4 dBu).
Sometimes, you can adjust input characteristics on the audio interface or on its control panel. For
details, refer to the documentation that came with the audio hardware.
IMPORTANT
Cubase does not provide any input level adjustments for the signals that are coming into your
audio hardware, since these are handled differently for each card. Adjusting input levels is either
done in a special application that is included with the hardware or its control panel.
Setting up Your System
Setting up Audio
11
Cubase AI 11.0.0