8.0

Included Effect Plug-ins
Modulation Plug-ins
97
Rate
If tempo sync is deactivated, this sets the sweep rate.
Sync
Activates/Deactivates tempo sync.
Width
Sets the depth of the chorus effect. Higher settings produce a more
pronounced effect.
Spatial
Sets the stereo width of the effect. Turn clockwise for a wider stereo effect.
Mix
Sets the level balance between the dry signal and the wet signal. If the effect
is used as a send effect, set this parameter to the maximum value as you can
control the dry/effect balance with the send.
Waveform Shape selector
Allows you to select the modulation waveform, altering the character of the
chorus sweep. A sine and a triangle waveform are available.
Delay
Affects the frequency range of the modulation sweep by adjusting the initial
delay time.
Filter Lo/Hi
Allow you to roll off low and high frequencies of the effect signal.
NOTE
If side-chaining is supported, the modulation can also be controlled from another
signal source via the side-chain input. If the side-chain signal exceeds the threshold,
the modulation is controlled by the side-chain signal’s envelope. For a description
of how to set up side-chain routing, see the “Operation Manual”.