8.0

Included Effect Plug-ins
Modulation Plug-ins
95
Speed Mod
If the Speed Change Mode setting is set to the right side, this knob allows
you to modulate the rotary speed.
Speed Mod Control (MIDI)
This pop-up menu allows you to select the MIDI controller that controls the
Rotary speed. If you do not want to use MIDI realtime control, set this to
Automation. If you select Pitchbend as MIDI controller, the speed changes
with an up or down flick of the bender. If other MIDI controllers are used, the
speed changes at MIDI value 64.
Additional settings
Overdrive
Applies a soft overdrive or distortion.
CrossOver
Sets the crossover frequency (200 to 3000 Hz) between the low and high
frequency loudspeakers.
Horn
Slow
Allows for a fine adjustment of the high rotor slow speed.
Fast
Allows for a fine adjustment of the high rotor fast speed.
Accel.
Allows for a fine adjustment of the high rotor acceleration time.
Amp Mod
Controls the high rotor amplitude modulation.
Freq Mod
Controls the high rotor frequency modulation.
Bass
Slow
Allows for a fine adjustment of the low rotor slow speed.
Fast
Allows for a fine adjustment of the low rotor fast speed.
Accel.
Allows for a fine adjustment of the low rotor acceleration time.