8.0

Included Effect Plug-ins
Modulation Plug-ins
93
Oscillator
LFO Amount
Controls how much the oscillator frequency is affected by the LFO.
Env. Amount
Controls how much the oscillator frequency is affected by the envelope that
is triggered by the input signal. Left of center, a loud input signal decreases
the oscillator pitch, whereas right of center the oscillator pitch increases if it
is fed a loud input.
Waveform buttons
Allow you to select the oscillator waveform: square, sine, saw, or triangle.
Range slider
Determines the frequency range of the oscillator in Hz.
Frequency
Sets the oscillator frequency ± 2 octaves within the selected range.
Roll-Off
Attenuates high frequencies in the oscillator waveform, to soften the overall
sound. This is best used with harmonically rich waveforms (square or saw, for
example).
LFO
Speed
Sets the LFO speed.
Env. Amount
Controls how much the input signal level – via the envelope generator –
affects the LFO speed. With negative values, a loud input signal slows down
the LFO, whereas positive values speed it up at loud input signals.
Waveform
Allows you to select the LFO waveform: square, sine, saw, or triangle.
Invert Stereo
Inverts the LFO waveform for the right channel of the oscillator, which
produces a wider stereo effect for the modulation.
Envelope Generator
The Envelope Generator section controls how the input signal is converted to
envelope data, which can then be used to control oscillator pitch and LFO speed.
Attack
Controls how fast the envelope output level rises in response to a rising input
signal.