8.0

Included Effect Plug-ins

Filter Plug-ins

Notches buttons (1, 2, 4, 8)

These buttons add additional notch filters to filter out harmonics.

High Cut Freq (3 Hz to 20 kHz, or Off)

This high-cut filter allows you to remove high-frequency noise. The filter is

inactive if the curve point is located all the way to the right. You can set the

frequency either in Hz or as a note value. If you enter a note value, the

frequency is automatically changed to Hz. For example, a note value of A3

sets the frequency to 440

Hz. When you enter a note value, you can also enter

a cent offset. For example, enter A5 -23 or C4 +49.

NOTE

Ensure that you enter a space between the note and the cent offset. Only in

this case, the cent offsets are taken into account.

High Cut Slope

Allows you to choose a slope value for the high-cut filter.

High Cut Preview

This button between the High Cut Freq button and the graphical display

allows you to switch the filter to a complementary low-cut filter. This

deactivates any other filters, allowing you to listen only to the frequencies you

want to filter out.

StepFilter

This plug-in is a pattern-controlled multimode filter that can create rhythmic,

pulsating filter effects.

General Operation

StepFilter can produce two simultaneous 16-step patterns for the filter cutoff and

resonance parameters, synchronized to the sequencer tempo.

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with ––XXXX–