8.0

Included Effect Plug-ins

EQ Plug-ins

Resonant

Applies serial filters where a gain increase of one band lowers the gain in

adjacent bands.

StudioEQ

Studio EQ is a high-quality 4-band parametric stereo equalizer with two fully

parametric mid-range bands. The low and high bands can act as either shelving

filters (three types), or as peak filter (band-pass), or as cut filter

(low-pass/high-pass).

Gain (-20 to +24 dB)

Sets the amount of attenuation/boost for the corresponding band.

Inv

Inverts the gain value of the filter. Use this button to filter out unwanted noise.

When looking for the frequency to omit, it sometimes helps to boost it in the

first place (set the filter to positive gain). After you have found the frequency

of the noise, you can use the Inv button to cancel it out.

Freq (20 to 2000 Hz)

Sets the frequency of the corresponding band. You can set the frequency

either in Hz or as a note value. If you enter a note value, the frequency is

automatically changed to Hz. For example, a note value of A3 sets the

frequency to 440

Hz. When you enter a note value, you can also enter a cent

offset. For example, enter A5 -23 or C4 +49.

NOTE

Ensure that you enter a space between the note and the cent offset. Only in

this case, the cent offsets are taken into account.

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with –––XXX–