8.0

Included Effect Plug-ins
EQ Plug-ins
67
Main EQ Control Surface
The heart of CurveEQ is the equalizer control surface with a built-in real-time
spectrum analyzer.
• To add a control point, double-click the curve.
• To delete a control point, double-click it.
The picture above shows the equalizer control surface with control points that can
be dragged to adjust the filter’s gain and frequency.
The readouts show the mouse cursor position within the display, the musical note
and detune in cents that correspond to the frequency position, and the mouse
cursor position within the spectrum power range.
If two or three curves are displayed, a white curve shows the summary frequency
response of all currently enabled filters.
While dragging a control point with the mouse, you can adjust the filter’s bandwidth
by additionally holding the right mouse button or pressing [Alt]/[Option].
Alternatively, you can use the mouse wheel to adjust the filter’s bandwidth.
• To enable the gain adjustment only, press [Ctrl]/[Command] while dragging a
point.
• To enable frequency adjustment only, press [Ctrl]/[Command]-[Alt]/[Option].
• To set a control point to 0 dB, press [Ctrl]/[Command], and double-click it.