8.0

Included Effect Plug-ins
Dynamics Plug-ins
62
Monitor
Allows you to monitor the filtered signal.
Attack (0.1 to 100 ms)
Determines how fast the compressor responds
to signals above the set
threshold. If the attack time is long, more of the early part of the signal passes
through unprocessed.
Hold (0 to 2000 ms)
Determines how long the gate remains open after the signal drops below the
threshold level.
Release (10 to 1000 ms or Auto mode)
Sets the time after which the gate closes after the set Hol
d time. If the Auto
button is activated, the plug-in automatically finds the best release setting for
the audio material.
Range
Adjusts the attenuation of the gate when it is shut. If Ra
nge is set to , the
gate is completely shut. The higher the value, the higher the level of the signal
that passes
through the shut gate.
Input Gain Meter
Shows the input gain.
Compressor Section
The compressor reduces the dynamic range of the audio, making softer sounds
louder or louder sounds softer, or both. The compressor features a separate display
that graphically illustrates the compressor curve shaped according to your settings.
Threshold (-60 to 0 dB)
Determines the level where the compressor kicks in. Only signal levels above
the set threshold are processed.
Ratio
Sets the amount of gain reduction applied to signals above the set
threshold.
A ratio of 3:1 means that for every 3 dB the input level increases, the output
level increases by 1 dB.
Make-up (0 to 24 dB or Auto mode)
Compensates for output gain loss, caused by c
ompression. If the Auto button
is activated, the knob becomes dark and the output is automatically adjusted
for gain loss.
Attack (0.1 to 100 ms)
Determines how fast the compressor responds
to signals above the set
threshold. If the attack time is long, more of the early part of the signal (attack)
passes through unprocessed.