8.0

Included Effect Plug-ins

Dynamics Plug-ins

Output (-12 to 12 dB)

Sets the output gain.

Attack (0.1 to 100 ms)

Determines how fast the compressor responds. If the attack time is long, more

of the initial part of the signal passes through unprocessed.

Release (10 to 1000 ms or Auto mode)

Sets the time after which the gain returns to its original level. If the Auto button

is activated, the plug-in automatically finds the best release setting for the

audio material.

Mix

Adjusts the mix between dry signal and wet signal preserving the transients

of the input signal.

In/Out Meters

Show the highest peaks of all available input and output channels.

VU Meter

Shows the amount of gain reduction.

Side-Chain

Activates the internal side-chain filter. The input signal can then be shaped

according to the filter parameters. Internal side-chaining is useful for tailoring

how the gate operates.

Filter buttons (LP, BP, and HP)

If the Side-Chain button is activated, you can use these buttons to set the

filter type to low-pass, band-pass, or high-pass.

Side-chain section

Center (50 to 20000 Hz)

If the Side-Chain button is activated, this sets the center frequency of the

filter.

Q-Factor

If the Side-Chain button is activated, this sets the resonance or width of the

filter.

Monitor

Allows you to monitor the filtered signal.

VintageCompressor

VintageCompressor is modeled after vintage type compressors.