8.0

Included Effect Plug-ins

Dynamics Plug-ins

Output (-24 to 24 dB)

Sets the output level.

Shaper Section

You can specify the Attack, Length, and Release by moving breakpoints or using

the corresponding knobs. Be careful with levels when boosting the gain. You can

reduce the output level to avoid clipping.

Attack (-20 to 20 dB)

Sets the gain of the attack phase of the signal.

Length (5 to 200 ms)

Sets the length of the attack phase.

Release (-20 to 20 dB)

Sets the gain of the release phase of the signal.

Sensitivity (-40 to -10 dB)

Sets the sensitivity of the detection.

Output

Sets the output level.

MultibandExpander

This plug-in allows a signal to be split into four frequency bands. You can reduce

the output level in relation to the input level for signals below the set threshold for

each band. This is useful if you want to enhance the dynamic range or reduce the

noise in quiet passages.

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with ––––X––

Side-chain

support

––––X––