8.0

Included Effect Plug-ins
Dynamics Plug-ins
52
Bypassing Frequency Bands
To bypass each frequency band, activate the
button in each section.
Soloing Frequency Bands
To solo a frequency band, activate the S b
utton in each section. Only one
band can be soloed at a time.
Output (-24 to 24 dB)
Sets the output level.
Compressor Section
You can specify the Threshold and Ratio by moving breakpoints or using the
corresponding knobs. The threshold is marked by the first breakpoint where the line
deviates from the straight diagonal.
Threshold (-60 to 0 dB)
Determines the level where the compressor kicks in. Only signal levels above
the set threshold are processed.
Ratio
Sets the amount of gain reduction applied to signals above the set
threshold.
A ratio of 3:1 means that for every 3 dB the input level increases, the output
level increases by 1 dB.
Attack (0.1 to 100 ms)
Determines how fast the compressor responds
to signals above the set
threshold. If the attack time is long, more of the early part of the signal passes
through unprocessed.
Release (10 to 1000 ms or Auto mode)
Sets the time after which the gain returns to its original level when the signal
drops below the threshold.
If the Auto button is activated, the plug-in
automatically finds the best release setting for the audio material.
Side-Chain Section
To open the side-chain section, click the SC button at the bottom left of the plug-in
window.
IMPORTANTIMPORTANTIMPORTANTIMPORTANT
To be able to use the side-chain function for the bands, global side-chain must be
activated for the plug-in.