8.0

Included Effect Plug-ins

Dynamics Plug-ins

Gating, in its fundamental form, silences audio signals below a set threshold. If a

signal rises above the set level, the gate opens to let the signal through. Signals

below the set level are silenced. MIDI Gate, however, is not triggered by threshold

levels, but MIDI notes. Therefore, it needs both audio and MIDI data to function.

Attack (0 to 500 ms)

Sets the time after which the gate opens when it is triggered.

Hold

Determines how long the gate remains open after a note-on or note-off

message. The Hold Mode settings are taken into account.

Release (0 to 3000 ms)

Sets the time after which the gate closes after the set Hold time.

Note To Attack

Determines to which extent the velocity values of the MIDI notes affect the

attack time. The higher the value, the more the attack time increases with high

note velocities. Negative values result in shorter attack times with high

velocities. If you do not want to use this parameter, set it to 0.

Note To Release

Determines to which extent the velocity values of the MIDI notes affect the

release time. The higher the value, the more the release time increases. If you

do not want to use this parameter, set it to 0.

Velocity To VCA

Controls to which extent the velocity values of the MIDI notes determine the

output volume. At a value of 127, the volume is controlled entirely by the

velocity values, and at a value of 0, the velocities have no effect on the volume.

Hold Mode

Sets the Hold Mode.

•In Note-On mode, the gate only remains open for the time set with the

Hold and Release parameters, regardless of the length of the MIDI note

that triggered the gate.

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with –––XXX–