8.0

Included Effect Plug-ins

Dynamics Plug-ins

Release (10 to 1000 ms or Auto mode)

Sets the time after which the gate closes (after the set Hol

d time). If the Auto

button is activated, Gate automatically finds the best release setting for the

audio material.

Range

Adjusts the attenuation of the gate when it is shut. If Ra

nge is set to , the

gate is completely shut. The higher the value, the higher the level of the signal

that passes

through the shut gate.

Analysis (Pure Peak to Pure RMS)

Determines whether the input

signal is analyzed according to peak or RMS

values, or a mixture of both. A value of 0 is pure peak and 100 pure RMS. RMS

mode operates using the average power of the audio signal as a basis,

whereas Peak mode operates more on peak levels. As a general guideline,

RMS mode works better on material with few transients such as vocals, and

Peak mode works better for percussive material with a lot of transient peaks.

Live

If this button is activated, the look-ahead fe

ature of the effect is deactivated.

Look-ahead produces more accurate processing, but adds a certain amount

of latency as a trade-off. If Live mode is activated, there is no latency, which

is better for live processing.

NOTE

If side-chaining is supported, the gate can also be controlled from another signal

source via the side-chain input. If the side-chain signal exceeds the threshold, the

gate opens. For a description of how to set up side-chain routing, see the

“Operation Manual”.

Limiter

This plug-in is designed to ensure that the output level never exceeds a set output

level, to avoid clipping in following devices.

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with –XXXXX–