8.0

Included Effect Plug-ins
Distortion Plug-ins
35
• To switch cabinets on the Cabinets page, click the model that you want to
use. Select No Cabinet if you only want to use the amps and effects.
•If you select Link Amplifier & Cabinet Choice, the plug-in automatically
selects the cabinet corresponding to the selected amp model.
Microphones
On the Microphones page, you can choose between different microphone types.
57
Dynamic microphone with cardioid pickup pattern.
121
Ribbon microphone with figure-8 pattern.
409
Dynamic microphone with supercardioid pickup pattern.
421
Dynamic microphone with cardioid polar pattern.
545
Dynamic microphone with cardioid pattern that minimizes feedback.
i5
Dynamic microphone with cardioid pickup pattern.
30
Reference and measurement microphone with omni directional polar pattern.
87
Condenser microphone with omni directional pattern.
You can choose between different microphone positions. These positions result
from two different angles (on axis and off axis) and three different distances from the
cabinet.
You can crossfade between the characteristics of the two microphones.
• To select one of the microphone types or blend between the two types, turn
the Mix control between the two microphones.
• To select a microphone position, click the corresponding ball in front of the
cabinet. The selected position is marked in red.
• To determine the ratio between line and mic, turn the Mix control on the left
of the cabinet.
NOTE
To scroll through microphones, use the mouse wheel when hovering over a
microphone.