8.0

Included Effect Plug-ins
Distortion Plug-ins
29
At the top of the plug-in panel, the following buttons open different pages in the
display section of the plug-in panel: Pre-Effects, Amplifiers, Cabinets,
Post-Effects, Microphones, Configuration, and Master.
These buttons are arranged according to the position of the corresponding
elements in the signal chain.
Below the display section, the selected bass amplifier is displayed. The color and
texture of the area below the bass amp indicate the selected cabinet.
Pre/Post-Effects
On the Pre-Effects and Post-Effects pages, you can select up to six common bass
effects. On both pages, the same effects are available, the only difference being the
position in the signal chain (before or after the bass amplifier). On each page, every
effect can be used once.
Each effect features an On/Off button known from stompbox effects, as well as
individual parameters.
Wah Wah
Pedal – Controls the filter frequency sweep.
Envelope Filter
Range – Determines the frequency range.
Q-Factor – Sets the intensity of the envelope filter effect.
Sensitivity – Determines how sensitive the effect reacts to the instrument
level.