8.0

Included VST Instruments

Spector

251

Master Volume and Pan

The master Volume knob controls the master volume (amplitude) of the instrument.

By default, this parameter is controlled by Envelope 1, to generate an amplitude

envelope for the oscillators.

The Pan knob controls the position of the instrument in the stereo spectrum. You

can use Pan as a modulation destination.

Modulation and Controllers

The lower half of the control panel displays the various modulation and controller

assignment pages available, as well as the EFX page. You switch between these

pages using the buttons above this section.

The following pages are available:

• The LFO page has two low frequency oscillators (LFOs) for modulating

parameters.

• The ENV page contains the four envelope generators that can be assigned to

control parameters.

• The Event page contains the common MIDI controllers (Mod wheel,

Aftertouch, etc.) and their assignments.

• The EFX page offers three separate effect types: Distortion, Delay, and

Modulation.