8.0

Included Effect Plug-ins
Distortion Plug-ins
23
Depth – Governs the depth of the amplitude modulation.
Octaver
Direct – Adjusts the mix of the original signal and the generated voices. A
value of 0 means only the generated and transposed signal is heard. By
raising this value, more of the original signal is heard.
Octave 1 – Adjusts the level of the signal that is generated one octave below
the original pitch. A setting of 0 means that the voice is muted.
Octave 2 – Adjusts the level of the signal that is generated two octaves below
the original pitch. A setting of 0 means that the voice is muted.
Delay
Delay – Sets the delay time in milliseconds. This parameter can be
synchronized to the project tempo.
Feedback – Sets the number of repeats for the delay.
Mix – Sets the level balance between the dry signal and the wet signal.
Tape Delay
Delay – Tape Delay creates a delay effect known from tape machines. The
Delay parameter sets the delay time in milliseconds. This parameter can be
synchronized to the project tempo.
Feedback – Sets the number of repeats for the delay.
Mix – Sets the level balance between the dry signal and the wet signal.
Tape Ducking Delay
Delay – Tape Ducking Delay creates a delay effect known from tape
machines with a ducking parameter. The Delay parameter sets the delay time
in milliseconds. This parameter can be synchronized to the project tempo.
Feedback – Sets the number of repeats for the delay.
Duck – Works like an automatic mix parameter. If the level of the input signal
is high, the portion of the effect signal is lowered, or ducked (low internal mix
value). If the level of the input signal is low, the portion of the effect signal is
raised (high internal mix value). This way the delayed signal stays rather dry
during loud or intensely played passages.
Overdrive
Drive – Overdrive creates a tube-like overdrive effect. The higher this value,
the more harmonics are added to the output signal of this effect.
Tone – Works as a filter effect on the added harmonics.
Level – Adjusts the output level.
Fuzz
Boost – Fuzz creates a rather harsh distortion effect. The higher this value,
the more distortion is created.
Tone – Works as a filter effect on the added harmonics.
Level – Adjusts the output level.