8.0

Included VST Instruments
Mystic
225
• Each separate effect section is laid out with a row of buttons that determine
the effect type or characteristic and a row of sliders for making parameter
settings.
• To activate an effect, click the Active button so that a dot appears.
Clicking again deactivates the effect.
Distortion
You can choose between 4 basic distortion characteristics:
• Distortion provides hard clipping distortion.
• Soft Distortion provides soft clipping distortion.
• Tape Emulation produces distortion similar to magnetic tape saturation.
• Tube Emulation produces distortion similar to valve amplifiers.
Drive
Sets the amount of distortion by amplifying the input signal.
Filter
Sets the crossover frequency of the distortion filter. The distortion filter
consists of a low-pass filter and a high-pass filter with a cutoff frequency
equal to the crossover frequency.
Tone
Controls the relative amount of low-pass and high-pass filtered signal.
Level
Controls the output level of the effect.
Delay
You can choose between 3 basic delay characteristics:
• Stereo Delay has two separate delay lines panned left and right.
•In Mono Delay, the two delay lines are connected in series for monophonic
dual tap delay effects.
•In Cross Delay, the delayed sound bounces between the stereo channels.