8.0

Included VST Instruments
LoopMash
208
Storing Your Configuration as Scenes
On the Slice Selection and the Audio Parameters pages, you find a row of 24
pads. For each of these pads, you can save one scene, that is, a combination of up
to eight tracks with all parameter settings. By triggering the pads, you can quickly
change between different scenes during your performance.
1) Save scene
2) Remove scene
3) Jump interval
4) Selected scene
5) Pad with associated scene
6) Empty scene pad
• To save the current settings as a scene, click the round button and then a pad.
This saves your setup to that pad.
• To recall a scene, click the corresponding scene pad.
• To remove a scene from a pad, click the x button and then a pad.
• To edit a scene pad label, double-click on the scene pad and enter a name.
• To rearrange the scene pads, click on a scene pad and drag it to a new
position.
IMPORTANTIMPORTANTIMPORTANTIMPORTANT
Once you have set up a LoopMash configuration, save it to a scene pad. Changing
scenes without saving means discarding any unsaved changes.