8.0

MIDI Effects
Track Control
194
Modul.
Allows you to send modulation messages on the track’s MIDI channel.
XG 1
The following controls are available if the XG 1 mode is selected.
Send 1
Send level for the reverb effect.
Send 2
Send level for the chorus effect.
Send 3
Send level for the variation effect.
Attack
Adjusts the attack time of the sound. Lowering this value shortens the attack,
while raising it makes the attack time longer.
Release
Adjusts the release time of the sound. Lowering this value shortens the
release, while raising it makes the release time longer.
Harm.Cont
Adjusts the harmonic content of the sound.
Bright
Adjusts the brightness of the sound.
CutOff
Adjusts the filter cutoff frequency.
Resonance
Sets the sound characteristic of the filter. With higher values, a ringing sound
is heard.
XG 2
In this mode, the parameters affect global settings in the instruments. Changing one
of these settings for a track affects all MIDI instruments connected to the same MIDI
output, regardless of the MIDI channel setting of the track. Therefore, it might be a
good idea to create an empty track and use this only for these global settings.
Eff. 1
Allows you to select which type of reverb effect should be used: No effect
(reverb deactivated), Hall 1–2, Room 1–3, Stage 1–2, or Plate.