8.0

MIDI Effects
Track Control
193
• Clicking the Off button sets all controls to their lowest value, without sending
out any MIDI messages.
• Clicking the Reset button resets all parameters to their default values, and
sends out the corresponding MIDI messages.
GS 1
The following controls are available if the GS 1 Controls mode is selected:
Send 1
Send level for the reverb effect.
Send 2
Send level for the chorus effect.
Send 3
Send level for the variation effect.
Attack
Adjusts the attack time of the sound. Lowering the value shortens the attack,
while raising it makes the attack time longer.
Decay
Adjusts the decay time of the sound. Lowering the value shortens the decay,
while raising it makes the decay longer.
Release
Adjusts the release time of the sound. Lowering the value shortens the
release, while raising it makes the release time longer.
Cutoff
Adjusts the filter cutoff frequency.
Resonance
Sets the sound characteristic of the filter. With higher values, a ringing sound
is heard.
Express
Allows you to send out expression pedal messages on the track’s MIDI
channel.
Ch. Press
Allows you to send out aftertouch (channel pressure) messages on the track’s
MIDI channel. This is useful if your keyboard cannot send aftertouch, but you
have sound modules that respond to aftertouch.
Breath
Allows you to send breath control messages on the track’s MIDI channel.