8.0

Included Effect Plug-ins

Distortion Plug-ins

Scenes

You can save up to 8 eight different settings.

If the default setting of a scene

is active, the selected scene button lights up yellow. If you change the default

settings, the button lights up green.

If you change the default settings, the button lights up green, indicating that

this sc

ene has customized settings.

To copy the settings of a scene to another scene, select the scene that you

want to copy, click Copy, and click one of the numbered buttons.

You can automate the selection of scenes.

Frequency Band Editor

The frequency band editor in the upper half of the panel is where you set the width

of the frequency bands as well as the output level. The vertical value scale to the left

shows the gain level of each frequency band. The horizontal scale shows the

available frequency range.

• To define the frequency range of the different frequency bands, use the

andles at the sides of each frequency band.

• To attenuate or boost the ou

tput level of each frequency band by ±15 dB, use

the handles on top of each frequency band.

Global Settings

Switches between multi band

and single band mode.

Mix

Sets the level balance between the dry signal

and the wet signal.

Output (-24 to 24 dB)

Sets the output level.

Band Settings

Mute

To mute each frequency band, activate the M b

utton in each section.

Bypassing Frequency Bands

To bypass each frequency band, activate the

button in each section.