8.0

Included Effect Plug-ins
Tools Plug-ins
156
Analog View
When you play a note, the pitch is shown in the middle of the display. The frequency
in Hz is shown in the bottom left corner and the octave range in the bottom right
corner.
The two arrows indicate any deviation in pitch. If the pitch is flat, they are positioned
in the left half of the display, if the pitch is sharp they are in the right half. The
deviation is also shown in the upper area of the display.
• If a string is out of tune (for example, if the pitch for the E string is shown as
Eb), tune the string so that the correct pitch is shown and the two arrows are
in the middle. Repeat this procedure for each string.
• To mute the output signal so that you can tune the strings in silence, activate
the Mute button at the bottom middle of the plug-in panel.
Digital View (Cubase Pro only)
Note
Displays the currently played pitch.
Cent
Displays the value, deviating from Tone. A negative value indicates that the
pitch is flat. A positive value indicates that the pitch is sharp.
Strobe/Classic
You can switch the display between two modes: Strobe and Classic.
In Strobe mode, a blue indicator constantly runs from right to left, that is from
positive to negative. The more flat a note is, the faster the indicator moves. As
soon as you play a sharp tone, the running direction of the indicator runs from
left to right, that is from negative to positive. When you play the correct pitch,
the indicator stops and the display turns gray.