8.0

Included Effect Plug-ins
Tools Plug-ins
155
Waveforms and noise section
Allows you to set the basis for the signal generated by the waveform
ge
nerator. You can choose between four basic waveforms (sine, triangle,
square, and sawtooth) and three types of noise (white, pink, and brownian).
Frequency section
Allows you to set the frequency of the generated signal. You can set the
fre
quency either in Hz or as a note value. If you enter a note value, the
frequency is automatically changed to Hz. For example, a note value of A3
sets the frequency to 440 Hz. When you enter a note value, you can also enter
a
cent offset. For example, enter A5 -23 or C4 +49.
NOTE
Ensure that you enter a space between the note and the cent offset. Only in
this case, the cent offsets are taken into account.
Gain section
Allows you to set the amplitude of the signal. The higher the value, the
st
ronger the signal. You can select one of the preset values, or use the slider
to set a value between -81 and 0 dB.
Tuner
This is a guitar tuner.
IMPORTANTIMPORTANTIMPORTANTIMPORTANT
Make sure that you deactivate any other effect that alters pitch, like chorus or
vibrato.
Simply connect a guitar or other instrument to an audio input and select Tuner as
an insert effect.
IMPORTANTIMPORTANTIMPORTANTIMPORTANT
To use Tuner, you must activate Monitor for the track with Tuner.
You can display Tuner in an analog view or in a digital view.
• To switch between analog view and
digital view, click in the upper left
corner of the plug-in.
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase
Pro
Nuendo NEK
Included with XXXXXX–