8.0

Included Effect Plug-ins
Tools Plug-ins
154
3. Optional: Adjust the level of the timecode, either in your host application or in
the receiving device.
Activate the Generate Code button (make the device send the SMPTE timecode in
free run mode) to test the level.
4. Make sure that the frame rate in the receiving device matches the frame rate
set in the SMPTE Generator.
5. Activate the Link to Transport button.
The SMPTE Generator now outputs timecode that corresponds to the time display of
your host application.
6. On the Transport panel, click Play.
RESULT
The external device is now synchronized and follows any position changes set with
the transport controls.
TestGenerator
This utility plug-in allows you to generate an audio signal, which can be recorded as
an audio file.
The resulting file can then be used for a number of purposes:
• Testing the specifications of audio equipment
• Measurements of various kinds, such as calibrating tape recorders
• Testing signal processing methods
• Educational purposes
The TestGenerator is based on a waveform generator which can generate a number
of basic waveforms such as sine and saw as well as various types of noise.
Furthermore, you can set the frequency and amplitude of the generated signal. As
soon as you add the TestGenerator as an effect on an audio track and activate it, a
signal is generated. You can then activate recording as usual to record an audio file
according to the signal specifications.
Cubase
LE
Cubase
AI
Cubase
Elements
Cubase
Artist
Cubase
Pro
Nuendo NEK
Included with ––––XX–