8.0

Included Effect Plug-ins
Tools Plug-ins
150
Amplitude
Allows you to increase/decrease the vertical size of the waveform.
Frequency
Allows you to select the frequency area for viewing.
Frequency Spectrum Analyzer Mode (Freq.)
If Freq. is activated, MultiScope divides the frequency spectrum into separate
vertical bands, which allows you to get a visual overview of the different frequencies’
relative amplitude. The frequency bands are shown from left to right, starting with
the lower frequencies.
Channel menu
If the source signal is stereo, you can select the Left or Right channel for
viewing, or Stereo for both channels to be shown in the window.
If MultiScope is used with a multi-channel track or output bus, you can select
any speaker channel for viewing, or All Channels to view them all at once.
Freeze
Freezes the display.
Mode A/Mode B
Allow you to switch between different view modes. Mode A is more
graphically detailed, showing a solid, blue amplitude bar for each band. Mode
B is less detailed, showing a continuous blue line that displays the peak levels
for each band.
These view modes do not have any effect if you have set the Frequency knob
to Spectrum.
Amplitude
Allows you to increase/decrease the vertical range of the bands.