8.0

Included Effect Plug-ins

Distortion Plug-ins

Magneto II

This effect simulates the saturation and compression of recording on analog tape

machines.

Saturation

Determines the amount of saturation and the generation of overtones. This

leads to a small increase in input gain.

Saturation On/Off

Activates/Deactivates the saturation effect.

Dual Mode

Simulates the use of two machines.

Frequency Range Low/Hi

These parameters set the frequency range of the spectrum band to which the

tape effect is applied.

For example, to avoid the saturation of lower frequencies, set the Freq Low

value to 200

Hz or 300 Hz. To avoid the saturation of very high frequencies,

set the Freq Hi parameter to values below 10

kHz.

Tape Solo

Allows you to hear only the set frequency range including the tape simulation

effect. This helps you to determine the appropriate frequency range.

HF-Adjust

Sets the amount of high frequency content of the saturated signal.

HF-Adjust On/Off

Activates/Deactivates the HF-Adjust filter.

Cubase

Elements

Cubase

Artist

Cubase

Pro

Nuendo NEK

Included with –––XXX–