8.0

Included Effect Plug-ins
Surround Plug-ins
146
If MixConvert V6 replaces the panner, the output configuration is determined by the
destination of the channel or cue send.
If MixConvert V6 is used as an insert effect, the output configuration can be
modified using the Select Output Channel Configuration pop-up menu. You can
select any configuration from the VST 3 specification that contains speakers that
are also present in the input configuration.
NOTE
You can change the output configuration by loading a preset.
Parameters
The plug-in panel is divided into three sections: By default, only the center section
is visible, the input and output channel displays can be shown to the left and right
of the center section.
• To show/hide the input or output channel configuration, click the
corresponding arrow button.
The center section contains the main plug-in parameters as well as buttons for
soloing several speakers in one go.
Solo Channel buttons
Solo all front channels, the LFE channel, or all surround channels in the input
or output display. All other channels are muted.
Listen to Solo Channels on Center Channel
Routes all soloed channels to the center channel. If no center channel is
present, the signal from the soloed channels is distributed equally to the left
and right speakers.
Global Gain
Controls the level of all output channels.
Listen to Surround Channels on Front Channels
Solos all surround channels, including the side channels, and routes or
downmixes them to the front speakers.