8.0

Included Effect Plug-ins
Surround Plug-ins
138
If your monitoring system is connected directly to your audio interface and lacks a
bass management system, you can use Bass Manager in the Control Room inserts
to adjust the signal levels and signal routing of the LFE and main speakers. Thus,
small speakers can achieve full-range sound.
Input/Output Level Meters
Level In
Shows the level of the input signal.
Level Out
Shows the level of the output signal.
Mains
Subwoofer
If this is activated, the low part of the main speakers is routed to the
subwoofer.
Freq
Sets the crossover frequency. Frequencies below this value are routed to the
subwoofer.
Gain
Sets the amount of attenuation/boost of the signal that is routed to the
subwoofer.
LFE
Center
If this is activated, the LFE signal is routed to the center channel.