8.0

Included Effect Plug-ins
Reverb Plug-ins
118
Output Settings
In the output section, you can control the overall level and determine the dry/wet
mix.
Output activity meter
Indicates the overall level of the impulse response and its settings.
Output
This slider adjusts the overall output level.
Out (-24 to +12)
Raises or lowers the signal output of the plug-in.
Mix (0 to 100)
Sets the level balance between the dry and the wet signal.
Lock
Activate this button (padlock symbol) next to the Mix parameter to lock the
dry/wet balance while browsing through the available presets and programs.
Custom Impulse Responses
In addition to working with the impulse responses included with REVerence, you
can import your own impulse responses and save them as programs or presets.
WAVE and AIFF files with a mono, stereo, true-stereo, or multi-channel (up to 5.0)
configuration are supported. If a multi-channel file contains an LFE channel, this
channel is ignored.
REVerence uses the same channel width as the track it is inserted on. When
importing impulse response files with more channels than the corresponding track,
the plug-in only reads as many channels as needed. If the impulse response file
contains fewer channels than the track, REVerence generates the missing channels
(for example, the center channel as a sum of the left and right channels). If the rear
channels are missing (when importing a stereo response file onto a 4.0 track, for
example), the left and right channels are also used for the rear channels. In this case
you can use the Rear offset parameter to create more spatiality.