8.0

Included Effect Plug-ins
Reverb Plug-ins
114
5. Set up as many programs as you need by following the steps above.
NOTE
If you want to use your set of programs in other projects, save your settings as a
plug-in preset.
RELATED LINKS
Importing Impulse Responses on page 119
Reverb Settings
The reverb settings allow you to change the characteristics of the room.
Main
All values shown in the top row apply to all speakers or to the front channels
if you are working with surround tracks.
Rear
If you are working with surround tracks up to 5.1, you can use this row to set
up an offset for the rear channels.
Auto Gain
If this button is activated, the impulse response is automatically normalized.
Reverse
Reverses the impulse response.
Pre-Delay
Determines how much time passes before the reverb is applied. This allows
you to simulate larger rooms by increasing the time it takes for the first
reflections to reach the listener.
Time Scaling
Controls the reverb time.
Size
Determines the size of the simulated room.
Level
A level control for the impulse response. This governs the volume of the
reverb.