8.0

Included Effect Plug-ins
Reverb Plug-ins
112
Browse
This button opens a browser window showing the available programs. If you
select a program in the browser, it is loaded into the active program slot. To
filter the list of impulse responses by room type or the number of channels, for
example, activate the Filters section (by clicking the Set Up Window Layout
button at the bottom left of the window).
Import
Click this button to load your own impulse response files from disk. The files
should have a maximum length of 10 seconds. Longer files are automatically
cut.
Program slots
Use these slots to load all the impulse responses that you want to work with
in a session. The selected program slot is indicated by a white frame. Used
slots are shown in a different color. Double-clicking an empty program slot
opens a browser window, showing the available programs. Clicking a used
program slot recalls the corresponding program and loads it into REVerence.
If you move the mouse over a used slot, the corresponding program name is
displayed below the active program name.
Smooth Parameter Changes
This button is located between the program slots and the Store/Erase
buttons. If it is activated, a crossfade is performed when switching programs.
Leave this button deactivated while looking for a suitable program or an
appropriate setting for an impulse response. Once you have set up the
program matrix to your liking, activate the button to avoid hearing artifacts
when switching between programs.
Store
Stores the active impulse response and its settings as a program.
Erase
Removes the selected program from the matrix.
Programs vs. Presets
You can save your REVerence settings as VST plug-in presets or programs. Both
presets and programs use the file extension .vstpreset and appear in the same
category in the MediaBay, but they are represented by different icons.
Preset
A REVerence preset contains all settings and parameters for the plug-in, that
is, all loaded impulse responses along with their parameter settings and
positions in the program matrix. Presets are loaded via the Presets pop-up
menu at the top of the plug-in panel.
Program
A REVerence program only contains the settings related to a single impulse
response. Programs are loaded and managed via the program matrix.